CI20 reaches userland

U-Boot SPL 2013.10-rc3-g9329ab16a204 (Jun 26 2014 - 09:43:22)
SDRAM H5TQ2G83CFR initialization... done


U-Boot 2013.10-rc3-g9329ab16a204 (Jun 26 2014 - 09:43:22)

Board: ci20 (Ingenic XBurst JZ4780 SoC)
DRAM:  1 GiB
NAND:  8192 MiB
MMC:   jz_mmc msc1: 0
In:    eserial3
Out:   eserial3
Err:   eserial3
Net:   dm9000
ci20# dhcp 
ERROR: resetting DM9000 -> not responding
dm9000 i/o: 0xb6000000, id: 0x90000a46 
DM9000: running in 8 bit mode
MAC: d0:31:10:ff:7e:89
operating at 100M full duplex mode
BOOTP broadcast 1
DHCP client bound to address 192.168.0.47
*** Warning: no boot file name; using 'C0A8002F.img'
Using dm9000 device
TFTP from server 192.168.0.44; our IP address is 192.168.0.47
Filename 'C0A8002F.img'.
Load address: 0x88000000
Loading: #################################################################
	 #######################################
	 347.7 KiB/s
done
Bytes transferred = 1519445 (172f55 hex)
ci20# bootm
## Booting kernel from Legacy Image at 88000000 ...
   Image Name:   evbmips 7.99.5 (CI20)
   Image Type:   MIPS NetBSD Kernel Image (gzip compressed)
   Data Size:    1519381 Bytes = 1.4 MiB
   Load Address: 80020000
   Entry Point:  80020000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
subcommand not supported
ci20# g 80020000
## Starting applicatipmap_steal_memory: seg 0: 0x3b3 0x3b3 0xffff 0xffff
Loaded initial symtab at 0x80304754, strtab at 0x8032d934, # entries 10499
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.5 (CI20) #170: Sat Mar  7 10:43:03 EST 2015
	ml@blackbush:/home/build/obj_evbmips32/sys/arch/evbmips/compile/CI20
Ingenic XBurst
total memory = 256 MB
avail memory = 247 MB
mainbus0 (root)
cpu0 at mainbus0: 1200.00MHz (hz cycles = 120000, delay divisor = 12)
cpu0: Ingenic XBurst (0x3ee1024f) Rev. 79 with unknown FPC type (0x330000) Rev. 0
cpu0: 32 TLB entries, 16MB max page size
cpu0: 32KB/32B 8-way set-associative L1 instruction cache
cpu0: 32KB/32B 8-way set-associative write-back L1 data cache
com0 at mainbus0: Ingenic UART, working fifo
com0: console

apbus0 at mainbus0
dwctwo0 at apbus0: USB controller
jzgpio at apbus0 not configured
jzfb at apbus0 not configured
usb0 at dwctwo0: USB revision 2.0
starting timer interrupt...
uhub0 at usb0: vendor 0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at uhub0 port 1: vendor 1a40 USB 2.0 Hub [MTT], class 9/0, rev 2.00/1.00, addr 2
uhub1: multiple transaction translators
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: LaCie P'9220 Mobile Drive, rev 2.10/0.06, addr 3
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0:  disk fixed
sd0: 465 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
umass1 at uhub1 port 2 configuration 1 interface 0
umass1: Apple Inc. iPod, rev 2.00/0.01, addr 4
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0:  disk removable
uhidev0 at uhub1 port 4 configuration 1 interface 0
uhidev0: vendor 04d9 VISENTA V1, rev 1.10/1.00, addr 5, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 (mux ignored)
uhidev1 at uhub1 port 4 configuration 1 interface 1
uhidev1: vendor 04d9 VISENTA V1, rev 1.10/1.00, addr 5, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 3 buttons, W and Z dirs
wsmouse0 at ums0 (mux ignored)
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
sd1: fabricating a geometry
sd1: 7601 MB, 950 cyl, 64 head, 32 sec, 4096 bytes/sect x 1946049 sectors
uhub2 at uhub1 port 6: vendor 03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 6
axe0 at uhub2 port 1
axe0: D-LINK CORPORAION DUB-E100, rev 2.00/10.01, addr 7
axe0: Ethernet address 00:80:c8:37:00:e1
ukphy0 at axe0 phy 3: OUI 0x0009c3, model 0x0005, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
root on sd0a dumps on sd0b
kern.module.path=/stand/evbmips/7.99.5/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init: copying out path `/sbin/init' 11
pid 1(init): ABI set to O32 (e_flags=0x70001007)
Thu Mar  5 18:27:33 UTC 2015
Not checking /: fs_passno = 0 in /etc/fstab
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: ci20
IPv6 mode: autoconfigured host
Configuring network interfaces: axe0.
Adding interface aliases:.
add net default: gateway 192.168.0.1
Waiting for DAD to complete for statically configured addresses...
axe0: link state UP (was UNKNOWN)
Building databases: dev, utmp, utmpx.
Starting syslogd.
Starting rpcbind.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting sshd.
Starting inetd.
Starting cron.
Thu Mar  5 18:27:55 UTC 2015

NetBSD/evbmips (ci20) (console)

login: